Customer Reviews:
Showing reviews 1-5 of 15
 Nicely hides cables to wall mounted TV February 27, 2009
klin
43 out of 44 found this review helpful
I bought a pair of these 2 gang plates to hide the cables that would otherwise be visible dropping from my wall mounted TV to the cabinet beneath it. Mount the top plate behind your TV with the opening facing down, and the bottom plate behind your cabinet with the opening facing up.
I was initially wondering if a 1, 2, or 3 gang was the correct size. I'm glad I chose the 2 gang as it comfortably fits 2 HDMI cables, 1 optical cable, 1 analog audio cable, 1 component video cable, and VGA/audio cable. I can drop cables from the top plate and not fuss too much pulling them out the bottom plate.
Don't mistakenly think you could probably squeeze the cables in a 1 gang version. While the combined width of the cables might fit, getting all the connectors through would be near impossible I would think. I measure the widest point of the opening at 2-7/8" for this 2 gang.
7/28/10 Update - Product still performs well.
Nice product, resonable priced. December 16, 2009
S. jaouen (CO)
3 out of 3 found this review helpful
Nice product, durable good construction. Used it to run my tv wires behind the wall. Does what you want it to do. Would like this packaged with the backing brackets instead of having to oder them seperatly but I guess if you already have a gang box in the wall you wouldn't need them.
Perfect for flat screens October 23, 2009
J. Beane (Wilmington, NC)
2 out of 2 found this review helpful
These wall plates are perfect for wires exiting the wall in a bundle. I ran 3 HDMI and two composite wires and the double gang plate worked ideally. I can push the wires back into the wall to where they barely show and it makes the entire installation look very neat overall.
Nice February 10, 2010
Matt Mullins
1 out of 1 found this review helpful
Good build quality, easy to install with a Dual Gang Low Voltage Mounting Bracket. I'm definitely glad I went with the 2-gang plate as I have about 7 cables going through the wall. Would purchase again.
Solid connstruction, great value to hide wires for wall mount June 20, 2010
Ashok Krishnamurthy (Cincinnati, OH USA)
1 out of 1 found this review helpful
The construction on this product feels solid and the finish is good. A pair of these is an ideal solution to hide wires for a flat screen TV wall mount.
One tip: use a dual gang wall mount bracket to mark cutout area on drywall, mount the bracket onto drywall and then this wall plate onto the bracket.
Second tip: You can not run a high voltage power cable directly behind the drywall via a plate such as this. This would be a building code violation in most places. You can only use this to run low voltage wires such as your hdmi and audio cables. To hide the TV's power wire, provide an electrical outlet directly behind the TV or use a product such as the following: http://www.amazon.com/gp/product/B002KF438I/ref=oss_product
Showing reviews 1-5 of 15
|
